Fine Point Jaws
Fine Point Jaws
The New Fine Point Norvise – Fly Tying Vise Jaw System combines the advantages of the standard, smooth free-spinning straight jaws, with the access characteristics of the original Fine Point Jaw Configuration. The new fine point jaws are set at a shallower 30° angle which will spin more smoothly than the current 45° design while still providing excellent access for small stuff, tying around the bend, and pinching material onto the hook. In addition, these new jaws project further from the front hub creating a more comfortable placement of your left hand for precise material positioning.
The Fine Point Jaw System comes with all three angles (15 degrees, 30 degrees, and 45 degrees).
Attachment is quick and easy, simply remove the straight (in-line) jaws held in place with a set screw in the front brass hub and replace them with the new Fine Point system. Next, to align the jaw up/down, use the pivot screw found on the jaw support arm. Then to align the fine point jaw side to side, locate the set screw found at the back of the jaws. Typically not very much adjustment is needed unless there is a dramatic change in hook size.
*Note: The upgraded version of the Fine Point Jaw is not compatible with older style vises with 1/2" diameter jaws.
Norvise offers five rotary fly tying jaws: The Standard Inline Jaws, Large Saltwater Jaws, the Fine Point Jaws, the Tube Fly System, and our newest addition, the Shank Jaws.